Omicron Series Analog Vibrato
 Introducing the Malekko Omicron Series analog Vibrato pedal.
For those knowledgeable on the subject, the long since discontinued MN3007 IC’s result in a much nicer sound than it’s little brother, the MN3207. The MN3007 are coveted by pedal builders and the D.I.Y. community for their superior sound quality. Often counterfeited, these ICs are tricky to purchase. Early in the year 2009 Malekko acquired a giant lot of actual obsolete MN3007 BBD ICs and went to work. The result is a superior lush analog true pitch (no dry) vibrato pedal in an unprecedented tiny enclosure…all at an affordable price.
Small and simple to use, this true bypass pedal has two control pots- speed and depth. It can’t get easier than that! This pedal is capable of subtle shimmer to awesome deep pitch bending and everywhere in between. Although this vibrato pedal will operate with a 9VDC regulated neg tip power supply (not included), it will sound fuller, richer, and have more headroom with a 12VDC regulated neg tip power supply (not included).
Musictoyz.com Price $140
 
Ekko 616
 650ms Analog Delay Pedal
For years, Malekko has been synonymous with the best quality BBD delays available. Today the evolution continues with the EKKO 616, a full featured yet compact delay with external modulation controls, an optional buffer, internal level pot and 650ms of pure analog bliss! The E616's specially voiced repeats allow a larger bandwidth to pass than most traditional analog delays. Turn the mix pot all the way up and the repeats will be slightly louder than the dry signal if needed, allowing greater flexibility. The regeneration pot will take you from a simple slapback to a nice gentle decay of a few repeats then all the way to taking off into outer space with just a turn of the pot! Engage the modulation button and the Malekko EKKO 616 takes on a whole new personality, from subtle chorusing or beautiful vibrato to way WAY beyond. The EKKO 616 also allows you to select your type of bypass between buffered or true bypass. Tired of annoying volume drops? An internal trimpot (labeled "gain") will allow you to set the EKKO 616's level to your specific setup.
At Malekko, we didn't set out to make a carbon copy of anything. Instead of looking backwards, we designed a new and visionary analog delay from the ground up.
Operates on a 9V battery or optional 9VDC neg tip regulated power supply.
Musictoyz.com Price $150
Chicklet
 In the year 2009, MALEKKO released the visionary Spring Chicken spring reverb emulator pedal. The world freaked out! Fast forward a few months, and all the chickies have flown the coop... The world cried. All the while, MALEKKO worked tirelessly in our secret lab to create what we now present-- The brickless, all-Malekko designed Spring Chicken replacement pedal-- The CHICKLET!
Boasting a super small size, less noise, and the super awesome "dwell" mod previously available as an option on the original Spring Chicken, this tiny reverb sounds HUGE! BUH-KAW!! All the great sound of a giant reverb tank in a small little pedal! This buffered pedal allows the reverb to "trail" after the pedal is bypassed, so no abrupt unnatural end to the reverb sound. Runs off a 'standard' 9VDC neg tip regulated power supply (not included).
No longer will you look like a fool when your sweet ripping solo's reverb sound suddenly stops.
Musictoyz.com Price $120
Spring Chicken
 Since the dawn of time, musicians have tried to cram a giant spring reverb in a little tiny enclosure. We bitches at Malekko have worked tirelessly like watchmakers for many years on this project alone-- spiraling springs into enclosures only to have them pop out like a peanut can full of snakes... There's got to be a better way!
Introducing the Malekko Spring Chicken. This little buddy is a VERY nice sounding spring reverb emulator, and although we didn't invent this IC, we sure made it sound fantastic! This is one of those pedals that's hard to stop playing with-- Every time I engage this reverb it puts a smile on my face!
True bypass, simple to use (one knob), and features expression pedal capability for reverb amount control. Operates on either 9vDC neg tip PS or 9v battery.
NO LONGER MADE AND WE ARE SOLD OUT!
Echo 600 Bright
 600mS CCD Analog Delay
The ECHO 600 is inspired by our love of bucket-brigade analog delays. The kind that sweeten sounds and allow dirty feedback looping that dosen't quit. It features increased headroom, 600ms delay time, switchable dual outputs, switchable true bypass or buffered output, expression pedal capability for regen, a recessed LED indicator, a tough lexan face, and is hand made by us. The 3 controls provide complete control over the time, regeneration and mix of the dry/wet signal. In a stereo set-up, the 2nd wet output allows the delay regen to naturally fade out after you turn it off!
The ECHO 600 BRIGHT is a uniquely voiced analog delay, producing clean, rich and crisp sounds able to cut through the mix and will repeat almost forever. This pedal sounds amazing!
Since a nine volt battery would only last about an hour, this pedal is powered by a 9v DC adaptor (neg tip) only (INCLUDED).
The VisualSound 1SPOT 9v DC power supply is NOT compatible with MALEKKO EKKO pedals. Use of this power supply will void manufacturer warrantee.
NO LONGER MADE - WE HAVE A FEW IN STOCK!
Musictoyz.com Price $255
Echo 600 Dark
 600mS CCD Analog Delay
The ECHO 600 is inspired by our love of bucket-brigade analog delays. The kind of delay that sweetens sounds and allows dirty feedback looping that dosen't quit. It features tons of headroom, switchable dual outputs, switchable true bypass or buffered output, expression pedal capability for regen control, a recessed LED indicator, a tough lexan face, and is hand made by us. The 3 controls provide complete control over the time, regeneration and mix of the dry/wet signal. In a stereo set-up, the 2nd wet output allows the delay regen to naturally fade out after you turn it off!
This ECHO 600 DARK is a uniquely voiced analog delay, producing a thick, rich sound with endless feedback. This pedal sounds incredible!
Since a nine volt battery would only last about an hour, this pedal is powered by a 9v DC adaptor (neg tip) only (INCLUDED).
The VisualSound 1SPOT 9v DC power supply is NOT compatible with MALEKKO EKKO pedals. Use of this power supply will void manufacturer warrantee.
NO LONGER MADE - WE HAVE A FEW IN STOCK!
Musictoyz.com Price $255
Barker ASSMASTER
 Harmonic Octave Analog Distortion Pedal
The Malekko Barker ASSMASTER is inspired by the original Maestro Bass Brassmaster octave pedal. Hand-built by us, this modern version delivers the same octave overdrive/harmonic generation effect in a quiet, fully controllable pedal. It features a recessed LED indicator, a pop-free true bypass switch, and a tough lexan face. The 5 controls provide complete control over the tone, overtones, harmonics and mix of the dry and wet signal.
We now offer an expression jack for the sensitivity control. Very cool! Get an expression pedal for hands-free sensitivity freakouts!
The pedal is powered by a 9v DC adaptor (neg tip) or internal battery snap.
The ass volume controls the volume of the distortion signal
The ass switch selects the tone of the distortion
The bass volume is the dry signal control; also provides massive gain to the dry signal
Harm selects the harmonic spectrum of the effect
Sensitivity controls the depth and response of the effect from subtle to excessively saturated
Musictoyz.com Price $255
|
Top of Page |
musictoyz.com HOME